rel.jpg (58141 bytes)

 

MIDI Solutions Relay

The MIDI Solutions Relay contains a relay that can be programmed to open or close in response to MIDI events (for eight relays in a single rack space unit, see the MIDI Solutions R8).

Event types are programmable and include:


A fast reed relay is used for a response time of less than 2ms. Relay contact is rated at 500 mA. Contacts are made available via connection at the tip and sleeve of a 1/4" mono phone jack. When switching inductive loads be aware of precautions that must be taken to avoid back EMF problems.

The Relay is programmed by sending it MIDI System Exclusive messages (see FAQs - Programming). This can be done easily with the Processors Programming Tools software. Once programmed, its settings are retained even after power is removed. The Relay can be reprogrammed with new settings as often as needed.

The Relay is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (see FAQs - Power and FAQs - LED for more information). A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.

weight: 4.3 oz.
dimensions: 4-3/16" x 2-3/16" x 1-3/32"


MIDI Solutions Relay Block Diagram:

diagrel.jpg (9808 bytes)


Learn more about the MIDI Solutions Relay

 



Products | FAQs | Support | About Us | Ordering



PO Box 3010, Vancouver, BC Canada V6B 3X5   Email: info@midisolutions.com   
Copyright 2014 MIDI Solutions Inc. All rights reserved.